Home > Braking > Brake Kit Replacement Discs > Ford > MIDILITE Solution by: totalwebsystems  
Sales for Business > Consumers (B2C)
From 1st July 2021 Rally Design will not be able to process orders to retail EU customers with a product value less than £135.00 (€150.00). Above €150.00 local customs may charge VAT, import duty and handling charge. Additionally postal operators and couriers may charge a fee to collect these charges. Please note, this does not apply to UK consumers or EU B2B customers. David Elderfield, Managing Director. Last Updated 01/07/2021.
Search
Brands
Shopping Cart
Your cart is empty!
0 items
£0.00
Go to Checkout
Your Account
Your Email Address
Your Password
Did You Know?
There are currently 426 guests online.

125,197,085 visitors online since Thursday 30 September, 2004

 
4 - Pot Forged Midilite Caliper Radial Mount
[MIDILITE]

The new Midilite four piston radial mount is the first of a new generation of Wilwood aluminium calipers produced from a drop-forged billet. This forging process produces a body design that provides higher strength and reduced load deflection superior to any cast or machined block billet caliper, combined with substantial x-bolting and extended flank design it is one of the stiffest, radial mount calipers currently available.

Most multi-piston calipers suffer from low speed caliper squeal caused by pad torsional vibration - The Midilite caliper features the unique Wilwood SRS (Squeal Reduction System) incorporating stainless steel pad retainers. These retainers eliminate the bridge wear caused by pad gouging and reduce the pad rattle/vibration harmonics which are the primary cause of the annoying '4-pot squeal'.

The clever quick change pad clip (patent under consideration), reusable by design allows ultra fast pad changes without hassle. The Midilite accepts disc diameters from 240 to 310mm, the low profile design allows maximum disc accommodation within a given wheel diameter, available to suit 21mm and 25mm disc width and piston sizes 1.75", 1.5", 1.38" and 1.25" allow a match with most stock/race master cylinders.

The caliper incorporates thick wall hard anodised pistons, is fully dust sealed and is supported by a range of Polymatrix pad compounds for street, rally and race applications.

NOTE: This caliper is also known as Wilwood Dynapro, Dynapro 4 pot & Dynapro Dust Seal Radial.



Part Numbers For Ordering:
Bore SizeDisc WidthCaliper Finish
Part Number
1.75" 44.5mm1.00" 25.4mmBlack120-7545
1.75" 44.5mm1.00" 25.4mmGrey 120-14709
1.75" 44.5mm.83" 21.1mmBlack120-7544
1.75" 44.5mm.83" 21.1mmGrey 120-14708
1.62" 41.1mm
 1.00" 25.4mm
Grey 120-14707
1.62" 41.1mm
.83" 21.1mm
Grey 120-14706
1.50" 38.1mm1.00" 25.4mmBlack120-7472
1.50" 38.1mm1.00" 25.4mmGrey 120-14705
1.50" 38.1mm.83" 21.1mmBlack120-7471
1.50" 38.1mm.83" 21.1mmGrey 120-14704
1.50" 38.1mm.38"/.50" / 9.6/12.7mmBlack 120-7749
1.50" 38.1mm.38"/.50" / 9.6/12.7mmGrey 120-14703
1.38" 35.1mm1.00" 25.4mmBlack120-7474
1.38" 35.1mm1.00" 25.4mmGrey 120-14702
1.38" 35.1mm.83" 21.1mmBlack120-7473
1.38" 35.1mm.83" 21.1mmGrey 120-14701
1.38" 35.1mm.38"/.50" / 9.6/12.7mmBlack 120-7751
1.25" 31.8mm1.00" 25.4mmBlack120-7543
1.25" 31.8mm1.00" 25.4mmGrey 120-14700
1.25" 31.8mm.83" 21.1mmBlack120-7542
1.25" 31.8mm.83" 21.1mmGrey120-14699

 

Note: Please select caliper part number and caliper finish from the drop down below.

Type III Mil-Spec hard anodizing replaces Type II black anodizing as the standard finish on all base and powder coat finish caliper models. This process produces a thicker, harder surface with a rich, medium-gray appearance.  More importantly, it creates a more durable wear surface in the piston bores, with increased resistance to abrasion and corrosion over the entire external surface of the caliper.

£189.50 
Available Options:
Brake Caliper Part Number:  




Your IP Address indicates that you are in the United States or Canada and we are currently unable to sell into those countries. If you do not reside in the United States or Canada then please e-mail your request directly to sales@rallydesign.co.uk quoting Ref: CATINFO/SG2/44.220.251.236
.

4 - Pot Forged Midilite Caliper Radial Mount
Click to enlarge
4 - Pot Forged Midilite Caliper Radial Mount
Click to enlarge

PLEASE NOTE: All prices exclude VAT at 20%.
Where applicable, this is calculated and added during the checkout procedure.
This product was added to our catalogue on Friday 17 September, 2004.
Current Reviews:


Related Products

Midilite 4-Pot Smart BP10 Pads
150-8946K - Midilite 4-Pot Smart BP10 Pads
£47.92
Buy Now 

Midilite 4-Pot Smart BP20 Pads
150-9419K - Midilite 4-Pot Smart BP20 Pads
£83.73
Buy Now 

Midilite 4-Pot Smart BP30 Pads
150-14776K - Midilite 4-Pot Smart BP30 Pads
£133.21
Buy Now 

Midilite 4-Pot EBC Green Stuff Pads
DP2039 - Midilite 4-Pot EBC Green Stuff Pads
£65.45
Buy Now 

Midilite 4-Pot Smart BP40 Pads
150-12248K - Midilite 4-Pot Smart BP40 Pads
£154.54
Buy Now 

Midilite 4-Pot Mintex Brake Pads M1144
MDB2581/M1144 - Midilite 4-Pot Mintex Brake Pads M1144
£81.90
Buy Now 

Midilite 4-Pot Polymatrix A Pads
15A-7263K - Midilite 4-Pot Polymatrix A Pads
£143.67
Buy Now 

Midilite 4-Pot Polymatrix Q Pads
15Q-7268K - Midilite 4-Pot Polymatrix Q Pads
£116.94
Buy Now 

Midilite 4-Pot Mintex Brake Pads MRM1802
MDB2581/MRM1802 - Midilite 4-Pot Mintex Brake Pads MRM1802
£87.30
Buy Now 
Stay Updated!
NotificationsNotify me of updates to 4 - Pot Forged Midilite Caliper Radial Mount

Product Manufacturer
Wilwood
Visit Wilwood
Show All Wilwood Products
Best Sellers
01.257mm Escort Princess 4-Pot Conversion Discs Plain (Pair)
02.257mm Escort Princess 4-Pot Conversion Discs X-D-G (Pair)
03.BK1 247mm Replacement Disc Plain (Pair)
04.BK1P 265mm Replacement Disc X-D-G (Pair)
05.BK1 247mm Replacement Disc X-D-G (Pair)
Featured Products
Handbrake
Handbrake

£19.50
2020 Catalogue Request
Follow us with Rally Design for iPhone, iPad and iPod touch on the iTunes App Store
Follow us with Rally Design for Android on Google Play
Rally Design Limited • Unit 4 St. Augustine's Business Park, Estuary Way, Swalecliffe, Kent, CT5 2QJ
 
Vehicle Identification: References to vehicle marques such as Ford, Vauxhall, Westfield, Caterham etc. are for vehicle fitment identification purposes only.
These references must not be used to imply the vehicle manufacturers have been involved in the design of these products nor endorsement of same.
Product Images: The images shown on this website are for illustration purposes only and may not be that of the actual product. If you are unsure please ask.