Big Red 15pc Brake Maintenance & Assembly Tool Set

A comprehensive (15 piece) brake maintenance and assembly tool set especially for the maintenance of drum and disc brake systems.

Includes:-

• Brake spring pliers with movable claw for removing and installing of brake shoe springs.
• Brake spring pliers for installing and removing the brake shoe recuperating spring on riveted brake linings.
• Brake caliper brush for removal of brake dust and dirt from the brake caliper.
• Brass brake caliper brush for cleaning aluminium brake calipers, soft brass bristles facilitate damage-free cleaning.
• Special tool for brakes for installing and removing spring plates and the holding device of brake linings on drum brakes, e.g. on VW, Seat, Skoda, Opel and Renault with rear drum brakes.
• Brake caliper file, extra slim style (width 10 mm), especially appropriate for Japanese vehicles, for removal of brake dust, rust and dirt from the brake caliper.
• Brake line flare nut wrench for screwed connections on brake lines at the front and rear axle, straight slot with 10x11 6-point.
• Assembly tool for installing and removing the draw spring of handbrake shoes, e.g. on Mercedes-Benz passenger cars with rear disc brakes, as well as on VW LT since 1997.
• Brake spring installer for pressure spring of the parking brake.
• Brake cable pliers for removing and replacing the handbrake cable, the pliers compress the return springs so far that the cable may be easily removed and replaced.
• Int hex joint bit socket, 10 mm, 3/8" drive.
• Int hex joint bit socket, 6 mm, 1/2" drive, length 110 mm.
• Int hex joint bit socket, 7 mm, 1/2" drive, length 100 mm.
• Int hex joint bit socket, 8 mm, 1/2" drive, length 80 mm.
• Phillips screwdriver with metal cap and 10 mm hex drive, length 265 mm.
  

Big Red - The largest manufacturer of jacks in the world, have just celebrated the manufacture of their 100 millionth jack!. These guys know more about jacks than anyone else in the world.  Certified ISO9001 (CQCC); ISO4001 (Vouching Technical); ISO/TS16949 (TUV Reinland).  Established 40 years and sold over 140 countries.  Jacks and axle stands are a workshop tool where quality and certification cannot be compromised