Omex Shiftlight Sequential

Omex Shiftlight Sequential

• Based on systems used in F1 and the BTCC.
• The Shift Light Sequential has four coloured LEDs that light incrementally as the shift point is approached.
• The remote LED module measures just 40 x 16 x 13mm and is connected to the control unit via a multicore cable.
  
• The shift point is indicated by the final red LED lighting.
• The third LED is amber and the first two are green.
• The unit is suitable for use with most 2, 4, 6 or 8 cylinder engines that use points, electronic ignition or an ECU.

• 2Cyl 1,000rpm - 20,000rpm
• 4Cyl 1,000rpm - 20,000rpm
• 6Cyl 1,000rpm - 12,000rpm
• 8Cyl 1,000rpm - 10,000rpm
  

• Adjustable in steps of 100rpm
• Accurate to +/- 10rpm @ 6,000rpm
  

• Can be triggered from any 0-12V engine speed trigger, typically the standard coil trigger wire or the standard tachometer trigger wire.

• 4 x 350mcd, 5mm
  

• Length: 78mm
• Width: 39mm
• Depth: 21mm
• Combined Weight: 140 grams.

• Length: 40mm
• Width: 13mm
• Depth: 16mm